Thunder Tiger TS4-N

Belts

the belts are possible to find as generic replacements however not always over the internet, I consulted a customer of us who is in the belt industry and he has got a source for the replacements for one of his suppliers within 5 minutes.

Rear belt

Total length of belt: 162 mm
Profile S3M
Width: 5 mm

Middle Belt

Total length of belt: 177 mm
Profile S3M
Width: 5mm

Front Belt

Total length of belt 417 mm
Profile S3M
Width 5mm

Originally they were made by Bando. There is a little space left so it could be possible that even 6 mm width will fit, but this has to be tried out. 6 mm is far more easily available than 5 mm.

A complete set is available from Ebay here:

https://www.ebay.de/itm/352784648118



Kommentare

Kommentar veröffentlichen

Beliebte Posts aus diesem Blog

 GXR-15 Engine (Kyosho) Carburator O-Rings used for low speed and highspeed needle OD: 6 mm CS: 1,5 mm Recoil Starter As many may have the issue that the bowden cable is broken, I fixed mine by using a generic recoil starter and took the bowden cable and handle from it. For this one the nozzle fits and you can replace your broken bowden cable https://www.ebay.de/itm/364750600819
Mehr anzeigen
Introduction This blog is to help users having vintage RC Cars to get spare parts. For a lot of things screws, o-rings, sealings, belts there are generic parts available. Most important is to know the exakt specifications to find them. This does not always get clear from the manufacturers description
Mehr anzeigen