Thunder Tiger TS-4N replacement of gear shift spring and ball

Thunder Tiger TS-4N replacement of gear shift spring and ball

The ball has a diameter of 3 mm the spring is 6 mm long, 3mm diameter and 0,5 mm thick, ball available here

https://aliexpress.com/item/1005004107735483.html

for the spring you have to search a little bit do not have a link right now. You can use the parts also from the clutch of the HSP 02045. However it is to note that the clutch itself does not fit, as it is too small.



Kommentare

Kommentar veröffentlichen

Beliebte Posts aus diesem Blog

Thunder Tiger TS-4N

Thunder Tiger TS-4N Belts the belts are possible to find as generic replacements however not always over the internet, I consulted a customer of us who is in the belt industry and he has got a source for the replacements for one of his suppliers within 5 minutes. Rear belt Total length of belt: 162 mm Profile S3M Width: 5 mm Middle Belt Total length of belt: 177 mm Profile S3M Width: 5mm Front Belt Total length of belt 417 mm Profile S3M Width 5mm Originally they were made by Bando. There is a little space left so it could be possible that even 6 mm width will fit, but this has to be tried out. 6 mm is far more easily available than 5 mm. A complete set is available from Ebay here: https://www.ebay.de/itm/352784648118
Mehr anzeigen

Introduction

Introduction This blog is to help users having vintage RC Cars to get spare parts. For a lot of things screws, o-rings, sealings, belts there are generic parts available. Most important is to know the exakt specifications to find them. This does not always get clear from the manufacturers description
Mehr anzeigen