GXR-15 Engine (Kyosho)

GXR-15 Engine (Kyosho)

Carburator

O-Rings used for low speed and highspeed needle

OD: 6 mm

CS: 1,5 mm

Recoil Starter

As many may have the issue that the bowden cable is broken, I fixed mine by using a generic recoil starter and took the bowden cable and handle from it.

For this one the nozzle fits and you can replace your broken bowden cable

https://www.ebay.de/itm/364750600819


Kommentare

Kommentar veröffentlichen

Beliebte Posts aus diesem Blog

Converting Carson Thor (Vulcano) 23 mm to standard 17 mm Hex wheels

Bild
Converting Carson Thor (Vulcano) 23 mm to standard 17 mm Hex wheels The Carson Thor (also named Vulcano) has special 23mm Hex wheels which are virtually not available anymore. The solution is to convert it to default 17 mm Hex wheels I've used this hex wheel hubs, they are a litte bit narrower than the original but that's ok https://www.ebay.de/itm/156135350611 below are the exakt same tires in 17 mm Hex Carson part number: 500900077 other alternatives Carson part number 500900106
Mehr anzeigen

Introduction

Introduction This blog is to help users having vintage RC Cars to get spare parts. For a lot of things screws, o-rings, sealings, belts there are generic parts available. Most important is to know the exakt specifications to find them. This does not always get clear from the manufacturers description
Mehr anzeigen

Thunder Tiger TS-4N replacement of gear shift spring and ball

Thunder Tiger TS-4N replacement of gear shift spring and ball The ball has a diameter of 3 mm the spring is 6 mm long, 3mm diameter and 0,5 mm thick, ball available here https://aliexpress.com/item/1005004107735483.html for the spring you have to search a little bit do not have a link right now. You can use the parts also from the clutch of the HSP   02045 . However it is to note that the clutch itself does not fit, as it is too small.
Mehr anzeigen