Introduction

This blog is to help users having vintage RC Cars to get spare parts. For a lot of things screws, o-rings, sealings, belts there are generic parts available. Most important is to know the exakt specifications to find them. This does not always get clear from the manufacturers description


Kommentare

Kommentar veröffentlichen

Beliebte Posts aus diesem Blog

 Thunder Tiger TS4-N Belts the belts are possible to find as generic replacements however not always over the internet, I consulted a customer of us who is in the belt industry and he has got a source for the replacements for one of his suppliers within 5 minutes. Rear belt Total length of belt: 162 mm Profile S3M Width: 5 mm Middle Belt Total length of belt: 177 mm Profile S3M Width: 5mm Front Belt Total length of belt 417 mm Profile S3M Width 5mm Originally they were made by Bando. There is a little space left so it could be possible that even 6 mm width will fit, but this has to be tried out. 6 mm is far more easily available than 5 mm. A complete set is available from Ebay here: https://www.ebay.de/itm/352784648118
Mehr anzeigen
 GXR-15 Engine (Kyosho) Carburator O-Rings used for low speed and highspeed needle OD: 6 mm CS: 1,5 mm Recoil Starter As many may have the issue that the bowden cable is broken, I fixed mine by using a generic recoil starter and took the bowden cable and handle from it. For this one the nozzle fits and you can replace your broken bowden cable https://www.ebay.de/itm/364750600819
Mehr anzeigen