O-Ring for needle of GX-15 Kyosho Ferrari F2004 engine

 O-Ring for needle of GX-15 Kyosho Ferrari F2004 engine

the measures seems to be (needs to be verified by me as soon as I receive the O-rings)

ID: 2,6 mm

CS: 1,3 mm


Kommentare

Kommentar veröffentlichen

Beliebte Posts aus diesem Blog

Thunder Tiger TS-4N replacement of gear shift spring and ball

Thunder Tiger TS-4N replacement of gear shift spring and ball The ball has a diameter of 3 mm the spring is 6 mm long, 3mm diameter and 0,5 mm thick, ball available here https://aliexpress.com/item/1005004107735483.html for the spring you have to search a little bit do not have a link right now. You can use the parts also from the clutch of the HSP   02045 . However it is to note that the clutch itself does not fit, as it is too small.
Mehr anzeigen

Thunder Tiger TS-4N

Thunder Tiger TS-4N Belts the belts are possible to find as generic replacements however not always over the internet, I consulted a customer of us who is in the belt industry and he has got a source for the replacements for one of his suppliers within 5 minutes. Rear belt Total length of belt: 162 mm Profile S3M Width: 5 mm Middle Belt Total length of belt: 177 mm Profile S3M Width: 5mm Front Belt Total length of belt 417 mm Profile S3M Width 5mm Originally they were made by Bando. There is a little space left so it could be possible that even 6 mm width will fit, but this has to be tried out. 6 mm is far more easily available than 5 mm. A complete set is available from Ebay here: https://www.ebay.de/itm/352784648118
Mehr anzeigen

Introduction

Introduction This blog is to help users having vintage RC Cars to get spare parts. For a lot of things screws, o-rings, sealings, belts there are generic parts available. Most important is to know the exakt specifications to find them. This does not always get clear from the manufacturers description
Mehr anzeigen